LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Engine Coolant Fan Resistor Replacement >> Installation Procedure

Installation Procedure

  1. Install the engine coolant fan resistor (1).
    Fig 1: Identifying Engine Coolant Fan Resistor Wiring Harness Connector
    GM2028322Courtesy of GENERAL MOTORS COMPANY
  2. Install the engine coolant fan resistor bolt (2) and tighten to 4 N.m (36 lb in).
    CAUTION: Refer to Fastener Caution .
  3. Connect the engine coolant fan resistor wiring harness plug.
  4. Connect the negative cable to the battery. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals