LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Wiring Systems And Power Management - Diagnostic Information And Procedures >> Diagnostic Information and Procedures >> Vehicle Will Not Change Power Mode >> Circuit/System Verification >> Without Push Button Start

Without Push Button Start

  1. Ignition ON.
  2. Verify the scan tool power mode parameters change when cycling the S39 Ignition Switch between OFF, ACCESSORY, ON and CRANK.
    • If the parameters change 
  3. All OK.
scientia non olet · About LEMON Manuals