LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Wiring Systems And Power Management - Diagnostic Information And Procedures >> Diagnostic Information and Procedures >> Vehicle Will Not Change Power Mode >> Circuit/System Verification >> With Push Button Start

With Push Button Start

  1. Verify DTC B097B 61 is not set.
    • If DTC B097B 61 is set 

      Test or replace the S38 Ignition Mode Switch.

    • If DTC B097B 61 is not set 
  2. Verify the green LED illuminates when the S38 Ignition Mode Switch is pressed and held for up to 10 s, with the brake pedal released.
    • If the green LED illuminates 
  3. All OK.
scientia non olet · About LEMON Manuals