LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Wiring Systems And Power Management - Diagnostic Information And Procedures >> Diagnostic Information and Procedures >> Repairing Connector Terminals (Terminal Repair) >> Unsealed Terminals

Unsealed Terminals

  1. Cut off the terminal between the core and the insulation crimp to minimize any wire loss.
  2. To minimize wire loss, remove only the insulation required.
  3. Position the stripped wire in the terminal.
  4. Hand Crimp the core wings first.
  5. Hand Crimp the insulation wings around the cable.
scientia non olet · About LEMON Manuals