Circuit/System Verification
- Ignition ON.
- Verify the green LED turns ON and OFF when commanding the Run/Start Power Mode Indicator On and Off with the scan tool.
- If the green LED does not turn ON and OFF
Refer to Green LED Test .
- If the green LED turns ON and OFF
- If the green LED does not turn ON and OFF
- Verify the amber LED turns ON and OFF when commanding the Accessory Power Mode Indicator On and Off with the scan tool.
- If the amber LED does not turn ON and OFF
Refer to Amber LED Test .
- If the amber LED turns ON and OFF
- If the amber LED does not turn ON and OFF
- All OK.