LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Wiring Systems And Power Management - Diagnostic Information And Procedures >> Diagnostic Information and Procedures >> FEP Connectors (Steering Gear) >> Removal Procedure

Removal Procedure

  1. Use a flat-bladed tool to release the locking tab on the connector.
    Fig 1: Releasing Locking Tab On Connector
    GM2374629Courtesy of GENERAL MOTORS COMPANY
  2. Option 1: Twist the flat-bladed tool to push the top of the locking tab inward while pulling the connector body out.
    Fig 2: Twisting Flat-Bladed Tool To Push Top Of Locking Tab Inward
    GM2728308Courtesy of GENERAL MOTORS COMPANY
  3. Option 2: Pry using the flat-bladed tool to depress the locking tab while pulling the connector body out.
    Fig 3: Using Flat-Bladed Tool To Depress Locking Tab
    GM2728310Courtesy of GENERAL MOTORS COMPANY
scientia non olet · About LEMON Manuals