LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Wiring Systems And Power Management - Diagnostic Information And Procedures >> Diagnostic Information and Procedures >> DTC B147E or B147F: Battery Saver Relay >> Circuit/System Verification

Circuit/System Verification

  1. Enable battery saver mode (transport mode) in the vehicle.
  2. Verify the KR104A Battery Saver Relay 1 clicks open and closed when cycling the ignition between ON and OFF.
    • If the KR104A Battery Saver Relay 1 clicks open and closed 
  3. All OK.