LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Wiring Systems And Power Management - Diagnostic Information And Procedures >> Diagnostic Information and Procedures >> DTC B144B: Run/Crank Power Relay Circuit >> Conditions for Setting the DTC

Conditions for Setting the DTC

B144B 01 

The ignition output is not active and a short to battery is detected 3 consecutive times on the ignition voltage circuit.

B144B 02 

A short to ground is detected on the ignition main relay coil control circuit.

B144B 04 

The ignition output is not active and an open is detected 20 consecutive times on the ignition voltage circuit.

scientia non olet · About LEMON Manuals