LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Wiring Systems And Power Management - Diagnostic Information And Procedures >> Diagnostic Information and Procedures >> DTC B1370-B1379, B1380-B1389 or B1440-B1443: Control Module Ignition >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify DTC U1814 is not set.
    • If DTC is not set 
  3. Verify the scan tool power mode parameters change when cycling the S39 Ignition Switch between OFF, ACCESSORY, ON and CRANK.
    • If the power mode parameters change 
  4. All OK.