Circuit/System Verification
- Ignition ON.
- Verify that DTC C0035, C0040, C0045 or C0050 is not set.
- If any listed DTC is set
Refer to DTC C0035, C0040, C0045 or C0050 .
- If none of the listed DTCs is set
- If any listed DTC is set
- Replace the K17 Electronic Brake Control Module.
- Verify the DTC does not set while operating the vehicle under the Conditions for Running the DTC.
- If the DTC sets
Replace the module that set the DTC.
- If the DTC does not set
- If the DTC sets
- All OK.