LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Drum Brake System >> Repair Instructions >> Drum Brake Adjusting Hardware Replacement >> Installation Procedure

Installation Procedure

  1. Install the adjuster assembly (2) to the adjuster actuator lever (1).
    Fig 1: Drum Brake Adjuster Actuator Lever And Adjuster Assembly
    GM2027562Courtesy of GENERAL MOTORS COMPANY

    Turn in the adjuster as far as possible.

  2. Install the adjuster spring (1). Ensure that the loop end of the spring fully engages the tab on the actuator lever.
    Fig 2: Brake Shoe Adjuster Spring
    GM2027552Courtesy of GENERAL MOTORS COMPANY
  3. Install the brake drum. Refer to Brake Drum Replacement .
  4. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals