LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Drum Brake System >> Repair Instructions >> Brake Drum Replacement >> Removal Procedure

Removal Procedure

  1. Check to ensure that the park brake is fully released.
    WARNING: Refer to Brake Dust Warning .
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. Remove the rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  4. Remove the brake drum screw (1).
    Fig 1: Brake Drum And Brake Drum Retaining Screw
    GM2027537Courtesy of GENERAL MOTORS COMPANY
  5. Remove the brake drum (2).
  6. If the brake drum is to be reinstalled to the vehicle, use the CH-41013  resurfacer or equivalent to clean any rust or corrosion from the hub/flange mating surface of the brake drum (2).
  7. Use the CH-42450-A  resurfacer or equivalent to clean the wheel hub flange.
scientia non olet · About LEMON Manuals