LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Drum Brake System >> Diagnostic Information and Procedures >> Drum Brake Adjusting Hardware Inspection

Drum Brake Adjusting Hardware Inspection

  1. Visually inspect the adjuster actuator spring (3) for the following conditions:
    Fig 1: Identifying Drum Brake Hardware
    GM2027514Courtesy of GENERAL MOTORS COMPANY
    WARNING: Refer to Brake Dust Warning .
    • The spring being bent or broken at any point along the spring
    • Excessive corrosion
    • Missing
  2. Visually inspect the adjuster assembly (1) for the following conditions:
    • The adjuster being bent or broken
    • Excessively worn, damaged or missing teeth
  3. Visually inspect the adjuster actuator lever for the following conditions:
    • The lever being bent or broken
    • The lever to adjuster surface being excessively worn
    • Broken spring attachment tab
    • Missing
  4. If any of the conditions listed were found, the affected part or parts require replacement. Refer to Drum Brake Hardware Replacement .
scientia non olet · About LEMON Manuals