LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brake System >> Repair Instructions >> Rear Brake Rotor Replacement >> Removal Procedure

Removal Procedure

  1. Remove the brake caliper and the caliper mounting bracket as an assembly from the steering knuckle. Refer to Rear Brake Caliper Bracket Replacement .
    Fig 1: Brake Rotor And Brake Rotor Retaining Bolt
    GM2028360Courtesy of GENERAL MOTORS COMPANY
    WARNING: Refer to Brake Dust Warning .
    CAUTION: Support the brake caliper with heavy mechanic wire or equivalent, whenever it is separated from its mount and the hydraulic flexible brake hose is still connected. Failure to support the caliper in this manner will cause the flexible brake hose to bear the weight of the caliper, which may cause damage to the brake hose and in turn may cause a brake fluid leak.
  2. Matchmark the position of the brake rotor to the wheel studs.
  3. Remove the rear brake rotor bolt (2).
  4. Remove rear brake rotor (1) from the wheel hub.
scientia non olet · About LEMON Manuals