LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brake System >> Repair Instructions >> Rear Brake Caliper Vibration Dampener Replacement >> Removal Procedure

Removal Procedure

  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Open the cap (2) of the brake caliper vibration damper (1), to gain access to the internal torx.
    Fig 1: Brake Caliper Vibration Damper
    GM2192646Courtesy of GENERAL MOTORS COMPANY
  3. Remove the brake caliper vibration damper (2) from the brake caliper vibration damper stud (1).
    Fig 2: Brake Caliper Vibration Damper And Brake Caliper Vibration Damper Stud
    GM2192643Courtesy of GENERAL MOTORS COMPANY

    Hold against internal torx of damper stud (1).

  4. Remove the damper stud (1) from the rear brake.
scientia non olet · About LEMON Manuals