Circuit/System Verification
- Ignition ON.
- Verify DTC B3697 42 or DTC B3697 4B is not set.
- If DTC B3697 42 or DTC B3697 4B is set
- Calibrate the K61 Sunroof Control Module. Refer to Control Module References .
- Verify DTC B3697 42 or DTC B3697 4B does not set while operating the sunroof.
- If DTC B3697 42 or DTC B3697 4B sets, replace the K61 Sunroof Control Module.
- If DTC B3697 42 or DTC B3697 4B does not set
- All OK.
- If DTC B3697 42 or DTC B3697 4B is not set
- Verify DTC B3697 00 or DTC B3697 39 is not set
- If DTC B3697 00 or DTC B3697 39 is set, replace the K61 Sunroof Control Module.
- If DTC B3697 00 or DTC B3697 39 is not set
- All OK.