LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Seat Trim And Upholstery >> Repair Instructions >> Driver Seat Frame Replacement >> Installation Procedure

Installation Procedure

  1. Install the wire harness, if equipped.
    Fig 1: Inner Seat Frame Cover
    GM2027676Courtesy of GENERAL MOTORS COMPANY
  2. Install inner seat frame cover (1).
  3. Install front seat back cushion cover (1) and pad (2) to frame (3). Refer to Driver or Passenger Seat Back Cover and Pad Replacement 
    Fig 2: Cushion Cover, Pad And Frame
    GM2027671Courtesy of GENERAL MOTORS COMPANY
  4. Install the wire harness (1), if equipped.
    Fig 3: Driver Seat Frame Wire Harness
    GM2027680Courtesy of GENERAL MOTORS COMPANY
  5. Install front seat cushion cover (1) and pad (2) to frame (3). Refer to Front Seat Cushion Cover and Pad Replacement 
    Fig 4: Cushion Cover, Seat Frame And Pad
    GM2027611Courtesy of GENERAL MOTORS COMPANY
scientia non olet · About LEMON Manuals