Circuit/System Verification
- Ignition ON.
- Verify the scan tool Windshield Washer Switch parameter changes between Active and Inactive when pressing and releasing the windshield washer switch.
- If the parameter does not change
Refer to Windshield Wiper/Washer Switch Malfunction .
- If the parameter changes
- If the parameter does not change
- Verify the windshield washers turn ON when commanding the Windshield Washer Relay Active with a scan tool.
- If the Windshield Washers do not turn ON
Refer to Windshield Washer Pump Malfunction
- If the Windshield Washers turn ON
- If the Windshield Washers do not turn ON
- All OK.