LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Cellular System, Entertainment System And Navigation System >> Special Tools and Equipment >> Special Tools (MIT Tool Instructions) >> Holden Radio Bluetooth Pairing Instructions

Holden Radio Bluetooth Pairing Instructions

  1. Using the radio controls, place the radio into "Discoverable Mode".
  2. Place the MIT into Bluetooth® mode by pressing TEST SELECTOR until the Bluetooth® LED is illuminated.
  3. With the MIT in Bluetooth® mode Press and Release the #1 button (the Bluetooth® LED will begin to slowly blink).
  4. Now Press and release the PAIR/CALL button on the MIT (the Bluetooth® LED will begin to blink a little faster).
  5. On the radio Enter the PASSKEY when prompted: (press "0000" then Press "OK").
  6. The MIT and radio will PAIR and CONNECT (the Bluetooth® LED will be Fast Flashing).
  7. Use as regular MIT at this point.
scientia non olet · About LEMON Manuals