LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Cellular System, Entertainment System And Navigation System >> Special Tools and Equipment >> Special Tools (MIT Tool Instructions) >> For all other Radios >> To Place a Test Call

To Place a Test Call

  1. Confirm pairing/bonding is complete - the Bluetooth® LED will be in a quick flash mode. If the vehicle is equipped with streaming audio and the radio is set to play a Bluetooth® audio file, the streaming audio playback will be audible.
  2. Press and release PAIR/CALL button to place a test call. Streaming audio will be temporarily turned off.
  3. Use the vehicle controls to answer the call.
  4. Audio playback confirms that the Bluetooth® connectivity is working correctly.
    NOTE: If the call is not answered within several rings, the MIT's audio files will not transmit, even though an active call is occurring.
  5. Use the vehicle controls to end the call. If applicable, streaming audio will resume.
    NOTE: The MIT will remain paired/bonded when the call is ended by the vehicle. To re-test the call function, place the MIT in Bluetooth® mode and press and release the Pair button to reconnect. When testing is completed, delete MIT from the audio system before returning the vehicle to the customer.
scientia non olet · About LEMON Manuals