LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Cellular System, Entertainment System And Navigation System >> Special Tools and Equipment >> Special Tools (MIT Tool Instructions) >> For all other Radios >> Standard Bluetooth Pairing/Bonding

Standard Bluetooth Pairing/Bonding

  1. Use the vehicle controls to place the radio into Bluetooth® Pairing mode. The vehicle will prompt you with a security code.
  2. Press and release the PAIR/CALL button. The Bluetooth® LED will blink slowly while preparing to have a security code entered.
  3. Wait for the all three LEDs to blink confirming it is ready to have the security code entered.
  4. Enter the code with the MIT keypad and hit ENTER.
  5. The Bluetooth® LED will blink slowly while pairing/bonding and move to a quick flash once paired/bonded.

    The vehicle should confirm pairing/bonding is complete.

scientia non olet · About LEMON Manuals