Hood Hinge Replacement

Fig 1: Hood Hinge Replacement Components With Torque Specifications

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury. Preliminary Procedure Hood Replacement - Remove
1	Hood Hinge Bolt [4x] CAUTION: Refer to Fastener Caution . Tighten 13.5 N.m (10 lb ft)
2	Hood Hinge

Callout

Component Name

WARNING:

When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

Preliminary Procedure

Hood Replacement - Remove

Hood Hinge Bolt [4x]

CAUTION:

Refer to Fastener Caution .

Tighten
13.5 N.m (10 lb ft)

Hood Hinge