Air Cleaner Assembly Replacement (LSA)

Fig 1: Air Cleaner Assembly & Fasteners (LSA)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the mass airflow sensor. Refer to Mass Airflow Sensor with Intake Air Temperature Sensor Replacement (LSA) .
1	Air Cleaner Resonator Outlet Duct Clamp CAUTION: Refer to Fastener Caution .
2	Air Cleaner Assembly Fastener (Qty: 2) Tighten 10 N.m (89 lb in)
3	Air Cleaner Assembly Procedure Pull up on the assembly to release lower retainers.