Air Cleaner Assembly Replacement (L99, LS3)

Fig 1: Air Cleaner Assembly And Fasteners (L99, LS3)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the mass airflow sensor. Refer to Mass Airflow Sensor with Intake Air Temperature Sensor Replacement (L99 or LS3) . Disconnect the outlet duct from the air cleaner assembly. Refer to Air Cleaner Resonator and Outlet Duct Replacement (L99, LS3) .
1	Air Cleaner Assembly Fastener (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Air Cleaner Assembly

Callout

Component Name

Preliminary Procedure

Air Cleaner Assembly Fastener (Qty: 2)

CAUTION:

Tighten
10 N.m (89 lb in)

Air Cleaner Assembly