Rear Seat Back Cushion Removal and Installation (Convertible)

Fig 1: Rear Seat Back Cushion (Convertible)

GM2525430

Courtesy of GENERAL MOTORS COMPANY

Callout

Component Name

Preliminary Procedure
Remove the rear seat cushion. Refer to Rear Seat Cushion Removal and Installation .

1

Rear Seat Back Cushion

Procedure

Using a flat bladed tool, release the seat back retainers through the access holes located between the seat back cushion and the rear end trim finish upper panel.
Fold the seat back cushion down and line up the flats on the hinge pins with the slots on the hinges.
Pull the seat back cushion upward to remove it from the vehicle.
Transfer components as necessary.