Rear Wheelhouse Liner Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (Without RT2)Tire and Wheel Removal and Installation (With RT2) . |
|
| 1 | Rear Wheelhouse Panel Liner Screw (Qty: 2)
CAUTION:
Refer to Fastener Caution . Tighten 3 N.m (27 lb in) |
| 2 | Rear Wheelhouse Panel Liner Bolt Tighten 3 N.m (27 lb in) |
| 3 | Rear Wheelhouse Panel Liner Push-In Retainer (Qty: 2) |
| 4 | Rear Wheelhouse Panel Liner Nut (Qty: 3) |
| 5 | Rear Wheelhouse Panel Liner |