Transmission Fluid Level Inspection
- Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle
- Clean any dirt from around the fill plug.
- Remove the transmission fill plug from the transmission.
- Check that the transmission fluid level is even with the bottom of the fill plug hole.
- Add transmission fluid, if necessary. Refer to Adhesives, Fluids, Lubricants, and Sealers .
- Install the transmission fill plug to the transmission and tighten the fill plug to 18 N.m (13 lb ft).
- Lower the vehicle.
CAUTION:
Refer to Fastener Caution .