Conditions for Running the DTC

P0324 or P0326

• Engine speed is between 400 and 8,500 RPM.
• Engine is running for greater than 2 s.
• The engine coolant temperature (ECT) is -40°C (-40°F) or warmer.
• The intake air temperature (IAT) sensor is -40°C (-40°F) or warmer.

P0325

• Engine speed is between 500-7000 RPM for 67 or more cumulative revolutions.
• Engine is running for 2 s or greater.
• The engine coolant temperature (ECT) is -40°C (-40°F) or warmer.
• The intake air temperature (IAT) sensor is -40°C (-40°F) or warmer.

P0326

• DTC P0068, P0606, P1516, P2101, P2135, or P2176 are not set.
• The engine speed is greater than 400 RPM.
• The manifold absolute pressure (MAP) is greater than 10 kPa.

P0327, P0328, P0332, and P0333

• The engine coolant temperature (ECT) is -40°C (-40°F) or warmer.
• Engine is running for 2 s or greater.

The DTCs run continuously when the above conditions are met.