Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0131, P0137, P0151, or P0157
- DTCs P0068, P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0120, P0121, P0122, P0123, P0128, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0220, P0222, P0223, P0442, P0443, P0446, P0449, P0455, P0496, P1516, P2101, P2119, P2135, P2176 are not set.
- The engine is operating in Closed Loop.
- The Ignition 1 voltage is between 10-32 V.
- The fuel level is greater than 10%.
- The throttle position (TP) is between 3-70%.
- The DTCs run continuously when the above conditions are met for 2 s.
P0132, P0138, P0152, or P0158
- DTCs P0068, P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0120, P0121, P0122, P0123, P0128, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0220, P0222, P0223, P0442, P0443, P0446, P0449, P0455, P0496, P1516, P2101, P2119, P2135, P2176 are not set.
- The engine is operating in Closed Loop.
- The Ignition 1 voltage is between 10-32 V.
- The fuel level is greater than 10%.
- The throttle position (TP) is between 0-70%.
- The DTCs run continuously when the above conditions are met for 2 s.
P0134, P0140, P0154, or P0160
- DTCs P0068, P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0120, P0121, P0122, P0123, P0128, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0220, P0222, P0223, P0442, P0443, P0446, P0449, P0455, P0496, P1516, P2101, P2119, P2135, P2176 are not set.
- The Ignition 1 voltage is between 10-32 V.
- The engine run time is greater than 300 s.
- The engine is operating in Closed Loop.
- The DTCs run continuously when the above conditions are met.