Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (Left Side)Intake Manifold Cover Replacement (Right Side) .
- Disconnect the spark plug wire (2) to the spark plug.
- Twist each spark plug boot 1/2 turn.
- Pull only on the boot in order to remove the wire from each spark plug.
- Disconnect the spark plug wire from the ignition coil (1).
- Twist each spark plug boot 1/2 turn.
- Pull only on the boot in order to remove the wire from the ignition coil.