LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Camaro LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Controls And Fuel - 6.2L (L99 LS3 LSA) Or 7.0L (LS7) - Repair Instructions) >> Repair Instructions >> Camshaft Position Sensor Replacement (LS7) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Camshaft Position Sensor (LS7)
    GM3654370Courtesy of GENERAL MOTORS COMPANY
  1. Remove the generator bracket assembly. Refer to Generator Bracket Replacement (LS7, LSA) .
  2. Disconnect the engine harness connector (4) from the camshaft position sensor (2).
  3. Remove the camshaft position sensor mounting bolt (1).
  4. Remove the camshaft position sensor (2) from the engine front cover.
scientia non olet · About LEMON Manuals