Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
- Ignition On.
- Verify that DTC P023A is not set.
- If the DTC is set
Refer to DTC P023A
- If the DTC is not set
- If the DTC is set
- Verify the KR18 Charge Air Cooler Coolant Pump Relay clicks and the M10 Charge Air Cooler Coolant Pump turns On and Off when commanding the Charge Air Cooler Coolant Pump On and Off with a scan tool.
- If the relay does not click or the pump does not turn On and Off
Refer to Circuit/System Testing
- If the relay clicks and the pump turns On and Off
- If the relay does not click or the pump does not turn On and Off
- All OK