Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTCs P0102, P0103, P0107, P0108, P0112, P0113, P0117, P0118, P0335, P0336, P0340, P0341, P0502, P0503, P0521, P0522, P0523, P0556, P0557, P0558, P0685, P0686, P0687, P0689, P0690 P3401, P3425, P3441, or P3449 are not set.
The engine speed is between 450-5,800 RPM.
The ECT sensor parameter is between 70 - 125°C (158 - 257°F).
The IAT sensor parameter is between -20 to 125°C (-4 to 257°F).
The engine is not in reduced power.
DTC P3400 runs continuously when the above conditions are met.