LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Camaro LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls And Fuel - 6.2L (L99 LS3 LSA) Or 7.0L (LS7) - DTC P0335 To DTC P3449 And Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC P0443: Evaporative Emission (EVAP) Purge Solenoid Valve >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different variant/trim than selected.

An ignition voltage is supplied directly to the evaporative emission (EVAP) purge solenoid valve. The EVAP purge solenoid valve is pulse width modulated (PWM). The engine control module (ECM) grounds the EVAP purge solenoid valve control circuit through an internal switch called a driver. The ECM monitors the status of the driver and displays the amount of ON time as a percentage on the scan tool.