LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Camaro LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Mechanical - 6.2L (L99 LS3 LSA) Or 7.0L (LS7) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Valve Rocker Arm and Push Rod Removal (LS7)

Valve Rocker Arm and Push Rod Removal (LS7)

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Valve Rocker Arm Bolts
    GM1552511Courtesy of GENERAL MOTORS COMPANY
    IMPORTANT:
    • Place the valve rocker arms and valve pushrods in a rack so they can be installed in the same location from which they were removed.
    • Note the locations of the intake (1) and exhaust (2) valve rocker arms.
  1. Remove the valve rocker arm bolts (214).
  2. Remove the valve rocker arms (213).
    3. Fig 2: View Of Valve Pushrods
    GM1552510Courtesy of GENERAL MOTORS COMPANY
  3. Remove the valve pushrods (212).
scientia non olet · About LEMON Manuals