Throttle Body Assembly Removal (LS3 or L99)
WARNING: This page is about a different variant/trim than selected.
- Remove the throttle body bolts (538).
- Remove the throttle body (508).
- Remove the throttle body gasket (509).
- Discard the gasket.
CAUTION:
Handle the electronic throttle control components carefully. Use cleanliness in order to prevent damage. Do not drop the electronic throttle control components. Do not roughly handle the electronic throttle control components. Do not immerse the electronic throttle control components in cleaning solvents of any type.
NOTE:
The intake manifold, throttle body, fuel injection rail, and fuel injectors may be removed as an assembly. If not servicing the individual components, remove the manifold as a complete assembly.