LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Camaro LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Mechanical - 6.2L (L99 LS3 LSA) Or 7.0L (LS7) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Throttle Body Assembly Installation (LS3 or L99)

Throttle Body Assembly Installation (LS3 or L99)

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Throttle Body, Gasket And Bolts
    GM1875999Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    DO NOT use the throttle body gasket again. Install a NEW gasket during assembly.

  1. Install the throttle body gasket (509) to the intake manifold. Align the locating tab of the gasket with the notch in the manifold.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the throttle body (508) and bolts (538). Tighten the throttle body bolts to 10 N.m (89 lb in).
scientia non olet · About LEMON Manuals