LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Camaro LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Mechanical - 6.2L (L99 LS3 LSA) Or 7.0L (LS7) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Oil Pump Disassemble (LS7)

Oil Pump Disassemble (LS7)

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Oil Pump Internal Components
    GM1552458Courtesy of GENERAL MOTORS COMPANY
    NOTE:
    • The internal parts of the oil pump assembly are not serviced separately. If the oil pump components are worn or damaged, replace the oil pump as an assembly.
    • Mark or identify the gears for assembly. Refer to Separating Parts .
  1. Remove the oil pump cover bolts (408).
  2. Remove the oil pump cover (409).
  3. Remove the secondary pump drive gear (410) and driven gear (412).
  4. Separate the secondary pump housing (456) from the primary pump housing (413).
  5. Remove the primary pump drive gear (410) and driven gear (412).
  6. Remove the pressure relief valve plug (416).
  7. Remove the pressure relief valve spring (415).
  8. Remove the pressure relief valve (414).
  9. Inspect the oil pump components. Refer to Oil Pump Cleaning and Inspection (LS7) .
scientia non olet · About LEMON Manuals