LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Camaro LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Mechanical - 6.2L (L99 LS3 LSA) Or 7.0L (LS7) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Oil Pump Disassemble (LS3, L99, or LSA)

Oil Pump Disassemble (LS3, L99, or LSA)

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Exploded View Of Oil Pump
    GM1402152Courtesy of GENERAL MOTORS COMPANY
    IMPORTANT:

    The internal parts of the oil pump assembly are not serviced separately, excluding the spring. If the oil pump components are worn or damaged, replace the oil pump as an assembly.

  1. Remove the oil pump cover bolts (408).
  2. Remove the oil pump cover (409).
    3. IMPORTANT:

    Mark or identify the gears for assembly. Refer to Separating Parts .

  3. Remove the drive gear (410).
  4. Remove the driven gear (412).
  5. Remove the pressure relief valve plug (416).
  6. Remove the pressure relief valve spring (415).
  7. Remove the pressure relief valve (414).
  8. Inspect the oil pump components. Refer to Oil Pump Cleaning and Inspection (LSA) Oil Pump Cleaning and Inspection (LS3 or L99) .
scientia non olet · About LEMON Manuals