LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Camaro LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Mechanical - 6.2L (L99 LS3 LSA) Or 7.0L (LS7) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Oil Pump Assemble (LS7)

Oil Pump Assemble (LS7)

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Oil Pump Internal Components
    GM1552458Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Prior to assembling the oil pump, coat all wear or internal surfaces with clean engine oil.

  1. Install the primary pump driven gear (412) and drive gear (410) into the primary pump housing (413).
  2. Assemble the secondary pump housing (456) to the primary pump housing (413).
  3. Install the secondary pump driven gear (412) and drive gear (410) into the secondary pump housing (456).
  4. Install the oil pump cover (409).
    5. CAUTION:

    Refer to Fastener Caution .

  5. Install the pump cover bolts (408) and tighten to 10 N.m (89 lb in).
  6. Install the relief valve (414).
  7. Install the relief valve spring (415).
  8. Install the relief valve plug (416) and tighten to 14 N.m (124 lb in).
  9. Inspect the oil pump for smooth operation by rotating the drive gears.
scientia non olet · About LEMON Manuals