LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Camaro LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Mechanical - 6.2L (L99 LS3 LSA) Or 7.0L (LS7) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Oil Level Indicator and Tube Removal (LS3, L99, or LS7)

Oil Level Indicator and Tube Removal (LS3, L99, or LS7)

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Oil Level Indicator Tube
    GM639837Courtesy of GENERAL MOTORS COMPANY
  1. Remove the oil level indicator from the tube.
  2. Remove the oil level indicator tube bolt.
  3. Remove the oil level indicator tube from the engine block.
  4. NOTE:

    Inspect the O-ring for cuts or damage. The O-ring may be used again if it is not cut or damaged.

  5. Remove the O-ring from the tube, as required.