LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Camaro LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical - 6.2L (L99 LS3 LSA) Or 7.0L (LS7) - Description And Operation) >> Description and Operation >> Engine Component Description (7.0L LS7) >> Piston and Connecting Rod Assembly

Piston and Connecting Rod Assembly

WARNING: This page is about a different variant/trim than selected.

The pistons are cast aluminum. The pistons use 2 compression rings and 1 oil control ring assembly. The piston is a low friction, lightweight design with a recessed top and barrel shaped skirt. The piston pins are chromium steel and are a full-floating design. The connecting rods are forged titanium alloy with press-in-place piston pin bushings. The connecting rods and rod cap are aligned by dowel pins retained in the cap. All applications use a piston with a graphite coated skirt. The piston, pin, and connecting rod are to be serviced as an assembly.

scientia non olet · About LEMON Manuals