LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Camaro LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 6.2L (L99 LS3 LSA) Or 7.0L (LS7) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Engine Block Valley Cover Replacement (LSA) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Engine Valley Cover, Retaining Bolts, Gasket & O-Rings
    GM1468311Courtesy of GENERAL MOTORS COMPANY
  1. Remove the supercharger. Refer to Supercharger and Gasket Replacement .
  2. Remove the oil pressure switch. Refer to Engine Oil Pressure Sensor and/or Switch Replacement (LSA) .
  3. Remove the engine valley retaining bolts (1).
  4. Remove the engine valley cover (2).
  5. Remove the engine valley gasket (3).
  6. Remove the O-rings (4) from the engine valley cover (2).
scientia non olet · About LEMON Manuals