Conditions for Setting the DTC

C0035 04 - C0050 04 or C1232 00 - C1235 00

• An open or a high resistance is detected on a wheel speed sensor ignition circuit.
• A short to ground or an open/high resistance is detected on a wheel speed sensor signal circuit.

C0035 0E - C0050 0E or C1207 00 - C1210 00

• A short to ground is detected on a wheel speed sensor ignition circuit.
• A short to voltage is detected on a wheel speed sensor signal circuit.

C0035 26 - C0050 26, C0035 27 - C0050 27, C0035 1F - C0050 1F, C1221 00 - C1224 00 or C1225 00 - C1228 00

• The tone ring may be demagnetized
• Water intrusion in the wiring harness
• Incorrectly mounted wheel speed sensor
• Debris on the wheel speed sensor or the tone ring
• Missing tooth or teeth on the wheel speed sensor tone ring
• Air gap between the wheel speed sensor and the tone ring too large
• Electrical magnetic interference with the wheel speed sensor harness