Removal Procedure
- Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement (Trax)
, Front Bumper Fascia Replacement (Encore)
.
- Disconnect the intake air pressure and temperature sensor electrical connector.
Courtesy of GENERAL MOTORS COMPANY
- Loosen the clamp (1) at the charge air cooler outlet pipe (2) to throttle body (3).
Courtesy of GENERAL MOTORS COMPANY
- Remove the fasteners (1) from the charge air cooler outlet air pipe to frame bracket (2).
Courtesy of GENERAL MOTORS COMPANY
- Unclip the retainer spring (1).
- Remove the charge air cooler outlet air hose (2) from the charge air cooler (3).