Installation Procedure
- Install the charge air cooler outlet air hose (2) to charge air cooler (3).
- Clip the in retainer spring (1).
- Install the fasteners (1) to the charge air cooler outlet air pipe to frame bracket (2).
- Install the charge air cooler inlet air pipe to the turbocharger.
- Tighten the clamp (1).
- Connect the intake air pressure and temperature sensor electrical connector.
- Install the front bumper fascia. Refer to Front Bumper Fascia Replacement (Trax) , Front Bumper Fascia Replacement (Encore) .
CAUTION:
Refer to Fastener Caution .