LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Trax LS, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays And Gauges >> Diagnostic Information and Procedures >> Charge Indicator Malfunction >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON, engine running.
  2. Verify the scan tool Battery Voltage parameter is between 12.5-15.5 V.
    • If 12.5-15.5 V 
  3. Verify the charge indicator turns on and off when commanding the All Indicators test ON and OFF with the scan tool.
    • If the charge indicator always stays on or always stays off 

      Replace the P16 Instrument Cluster.

    • If the charge indicator turns on and off as commanded 
  4. All OK.
scientia non olet · About LEMON Manuals