Air Inlet Grille Panel Replacement

Fig 1: Air Inlet Grille Panel

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the fixed antenna, if equipped. Refer to Radio Antenna Replacement . Remove the windshield wiper arms. Refer to Windshield Wiper Arm Replacement (Conventional) . Remove the rear hood seal. Refer to Hood Rear Seal Replacement .
1	Air Inlet Panel End Panel
2	Air Inlet Panel Retainer (Qty: 2)
3	Air Inlet Panel Screw (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
4	Air Inlet Panel Clip
5	Air Inlet Panel