Front Side Door Wiring Conduit Replacement

Fig 1: View Of Conduit Grommet & Electrical Connector

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the hinge pillar insulator cover. Refer to Body Hinge Pillar Trim Panel Replacement .
1	Electrical Connector Procedure Mark the location and the color of the wires to the electrical socket before removing the wires. Disconnect the door wiring harness electrical connector from the body harness. Remove the wiring harness wiring one at a time from the conduit. Remove the wiring harness from the rubber conduit.
2	Conduit Grommet

Callout

Component Name

Preliminary Procedure
Remove the hinge pillar insulator cover. Refer to Body Hinge Pillar Trim Panel Replacement .

Electrical Connector

Procedure

Mark the location and the color of the wires to the electrical socket before removing the wires.
Disconnect the door wiring harness electrical connector from the body harness.
Remove the wiring harness wiring one at a time from the conduit.
Remove the wiring harness from the rubber conduit.

Conduit Grommet