LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Spark LT, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim And Interior Paneling >> Repair Instructions >> Rear Wheelhouse Trim Finish Panel Replacement

Rear Wheelhouse Trim Finish Panel Replacement

Fig 1: Rear Wheelhouse Trim Finish Panel Assembly
GM2309225Courtesy of GENERAL MOTORS COMPANY
Rear Wheelhouse Trim Finish Panel Replacement

Callout Component Name

Preliminary Procedures

  1. Remove the rear side door sill trim plate. Refer to Rear Side Door Sill Trim Plate Replacement .
  2. Remove the rear seat back. Refer to Rear Seat Back Cushion Removal and Installation .
  3. Remove the rear seat belt lower bolt. Refer to Shoulder Belt Replacement - Rear .
1 Rear Wheel House Trim Finish Panel Screw (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
2 N.m (18 lb in)
2 Rear Wheelhouse Trim Finish Panel Clip (Qty: 2)
3 Rear Wheelhouse Trim Finish Panel Assembly
scientia non olet · About LEMON Manuals